Reed contact radio detector
The reed contact radio detector consists of 2 units, a detector and a magnet.
It is used to protect doors and windows. The detector is fixed to a wall or a frame
and the magnet itself is attached to a door or a window. Opening a door or window
removes the magnet from the detector and interrupts the magnetic field. This interruption
is detected by the detector and sent to the radio receiver. In the event of arming the alarm device.
triggers an alarm.
- ideal for use in motor homes, caravans, garages and yachts
- small housing facilitates installation
- powerful magnet
- gap dimension: up to 25 mm, if magnet horizontal to contact then up to 35 mm
- reed magnetic contacts ideal for securing doors, windows, roof hatches and storage flaps
- can be connected to Snapper radio receiver (Art.No: 7075)
- NO WIRING TO THE ALARM SYSTEM!
- frequency: 433.92 MHz
- sends a coded signal to the alarm system
- range up to 30 m.
- own power supply (CR 2032)
- Power consumption: depending on usage several years.
- Function test: Indication by red LED, transmitter test: reception is indicated by LED of alarm system as "door open signal".
Delivery:
1x Reed contact radio detector
1x magnet
2x screw set for magnet and radio detector
2x 3M adhesive pads
- perfect usage for Motorhomes and Caravan
- progamable to Snapper Classic and Snapper Classic Caravan
- NO WIRING TO THE ALARMUNIT!
- when alarm transmit a coded signal to the Alarmsystem
- Range up to 30 m.
- Power: 1pc 3 Volt CR2032 Battery
- Power consumation: many years
- Frequency 433.92 MHz
- Reed Magnet switches are perfect to protect doors and windows
Size Transmitter: 77x20x18 mm
Size Magnet: 52x10x11 mm
-
Visitor,
12/11/2022
-
Visitor,
11/26/2022
-
Visitor,
10/24/2022
-
Visitor,
10/15/2022
-
Visitor,
10/14/2022