WoMo 4 SNAPPER CAN BUS alarm system
The alarm system is preferably installed in motorhomes based on Ford Transit, Fiat Talento, MAN TGE, Mercedes Sprinter, Renault Trafic, VW Crafter, VW T5/T6 with partially or fully integrated body. The alarm system is switched together with the factory remote control. Central locking (ZV) close = alarm armed, ZV open = alarm disarmed.
- Reads all relevant data from the CAN DATA BUS in the vehicle.
- No external programming device required! Settings by service button
- ideal for all vehicles with partially or fully integrated bodywork
- does not write into the CAN DATEN BUS of the vehicle!
- We generally do not control vehicle horns, because the lines, fuses are too easy to manipulate.
- We deliver all alarm systems in principle with a loud and powerfull siren!
- All doors and the interior are protected by our infrasound sensor! Large-volume air pressure changes trigger the alarm.
- After extensive testing with the Truma heater at all heating levels (ECO to Boost) in a FIAT Ducato 2019, there was no false alarm with our infrasonic sensor.
- Sensors remain armed even when sleeping or moving around in the vehicle.
- Protection against door locks being slammed open and windows being smashed by our 2-zone shock sensor (vibration sensor), pre-warning adjustable (unfortunately not approved in EU).
- Protection against manipulation of door locks with key-like unlocking tools in the driver's door lock and operation of the central locking button in all Ford vehicles
- Operation of multiple alarm sensors via plug & play
- Further sensors like e.g. AntiJammingsensor, K.O.Gassensor, inclination position sensor connectable
- Switching off of the sensors comfortably possible, but outside skin protection of all doors remains active
- Retrofit missing hood contact (for all FORD please order art.no.: 0039) and thus protection against tampering and opening of the hood
- Radio receiver enables monitoring and operation of reed contact radio detectors
- only one reed-contact radio detector is needed for protection of both rear storage flaps
- Monitoring of ignition, system "sounds" alarm if unauthorized start is made
- The immobilizer present in the alarm system prevents the vehicle from being started
- Flashing light control and acknowledgement
- Audible acknowledgement tone (programmable)
- Connection for second siren and GSM/GPS tracking
- EU approval
MADE IN EUROPE !
Technical data:
Rated voltage: +12V
Operating voltage: +9V ... +15V
Power consumption: Standby 20 mA
Disarm 10 mA
Operating temperature: -40°C ... +80°C
Alarm duration: 30 sec.
Ready to receive after standby 25 sec.
Delivery:
Snapper CAN BUS Alarm
1x loud and powerfull siren
1x status LED (also warns of door open!)
1x 2-zone shock sensor (protects against smashing windows, unlocking door locks)
1x Multi 2in1 infrasonic air pressure/ glas breakage sensor (detects opening of doors and windows and protects against smashing windows)
1x reed magnet contact radio receiver
1x reed magnet contact radio detector incl. 9V block battery
1x reed magnet contact opener
1x Y-adapter for 2 alarm sensors